1-meter or 1/2 meter long fiberglass rods can be easily and fast connected to the required length by means of the crimped thread sleeves at the end of the rods.

Cables and wires can be pushed through as well as pulled with the push-pull rods, e.g. in:

• false ceilings
• under floor channels
• cable raceways and short conduits
• recessed walls
• small openings and narrow spaces

  Even if cables or tools are lost in the recessed walls or shafts, the rods along with the hook or the optional magnet can be used to retrieve the same.

• Technical data and quality benefits:

• cable pull and push rods made of high-class compound fiber glass
• highest strength and maximum of flexibility at push-pull forces due to special fiber-core
• strand diameter 6,7mm
  
• trouble-free pulling due to yellow polypropylene core coating with low coefficient of friction
• abrasion and heat resistant, also resistant to acids, alcohols, leaches, resins, greases and oils
• non electrically conducting pulling system
• due to the described electro-mechanical, physical und thermic qualities these fibre glass strands become ideal cable and wire push-pull rods

professional push and pull strands made from compound fiberglass