 |
 |
Data
sheet cable pulling devices
|
 |
|
| powerod
FT 20 / 30 / 40 |
|
|
|
|
| fiberglass
cable pulling devices "fish tapes" |
|
|
|
|
|
The useage of cable
pulling devices (fish tapes) eases the later installation of
- e.g. electrical
conductors in existing conduits in buildings and industry
- e.g. electrical
cables in motor and sailing yachts
- e.g. halyards
and wire forerunners in mast or boom on sailing yachts
|
|
|
|
|
|
|
Technical
data
and quality benefits:
- cable
pulling devices
made of high-class compound fiber glass
- highest strength
and maximum of flexibility at push-pull forces due to special fiber-core
- strand-diameter
3mm, tested withdrawal force of thread-sleeve >1 kN (100kg), strand
breaking load 5 kN
- just 50 mm minimal
bending radius for narrow conduits and pipe bends
- trouble-free
pulling due to yellow polypropylene core coating with low coefficient
of friction
- abrasion and
heat resistant, also resistant to acids, alcohols, leaches, resins,
greases and oils
- non conducting
pulling system
- due to the described
electro-mechanical, physical und thermic qualities these fibre glass
strands become the ideal cable pulling device compared with standard
devices with steel or plastic core
|
|
|
|
|
|
|
professional
cable
pulling devices
with high-class
fiber glass core,
spooling mechanism and extensive accessories
| Content: |
|
part
number
|
powerod
FT 20 (length 20 m)
|
|
4080351
|
powerod
FT 30 (length 30 m)
|
|
4080352
|
|
powerod
FT 40 (length 40 m)
|
|
4080353
|
Each
fibre glass strand is equipped with 2 thread-sleeves, 1 pulling
eye and 1 flexi-guide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
