Data sheet cable pulling devices
fiber rod FT 15 / 20  
back
cable pulling devices "fish tapes"

The useage of cable pulling devices (fish tapes) eases the later installation of

  • e.g. electrical conductors in existing conduits in buildings and industry
  • e.g. electrical cables in motor and sailing yachts
  • e.g. halyards and wire forerunners in mast or boom on sailing yachts







    Technical data and quality benefits:
  • cable pulling devices made of high-class compound fiber glass
  • highest strength and maximum of flexibility at push-pull forces due to special fiber-core
  • strand-diameter 3mm, tested withdrawal force of thread-sleeve >1 kN (100kg), strand breaking load 5 kN
  • just 50 mm minimal bending radius for narrow conduits and pipe bends
  • trouble-free pulling due to yellow polypropylene core coating with low coefficient of friction
  • abrasion and heat resistant, also resistant to acids, alcohols, leaches, resins, greases and oils
  • non conducting pulling system
  • due to the described electro-mechanical, physical und thermic qualities these fibre glass strands become the ideal cable pulling device compared with standard devices with steel or plastic core

professional cable pulling devices with high-class fiber glass core in a quiver with shoulder carry strap

Content:  
part number
fibre rod FT 15 (length 15 m)
 
4080354
fibre rod FT 20 (length 20 m)
 
4080355
Each fibre glass strand is equipped with 2 thread-sleeves, 1 pulling eyelet and 1 leading head.
 


We reserve us the right for technical changes.
   
back