Data sheet punchtool
punchtool  
back
Punch down tool for Twisted Pair cables

The press / punch down tool punchtool is designed for the connection of Twisted Pair cables to terminals with IDC contacts (e.g. in switchboards or wall outlet sockets).
There are different exchangeable punch down blades available for terminals from various manufacturers.
  • punch down tool with mechanism made from metal parts
  • with impact-mechanism (release after achieving the pre-adjusted pressure)
  • adjustable pressure for conductor sizes AWG 28...20
  • storage box for 1 punch down blade
  • bayonet lock for easy change of the blades

The installation of data cables – e.g. in the structured building cabling – must be absolutely reliable, so that you can always count on a perfect function system.
For this, you need suitable tools for the installation, no matter if for new wiring, maintenance or repair.

Content:  
part number
punchtool  
4030026
Basic-tool
     
Optional accessories
 
punchblade 110
4070080
punch down blade for 110-terminals
(2 functions: with and without cutting off the over standing conductors)
punchblade KRONE  
4070081
punch down blade for Krone terminals
(2 functions: with and without cutting off the over standing conductors)
punchblade LSA  
4070082
punch down blade for Krone LSA Plus terminals
(scissors principle to cut off the over standing conductors)
 
other blades on request
We reserve us the right for technical changes.
back